Short Stories By Jhenu

Dream Job

New Drug was invented by scientist, who is also an Engineer. This Drug reduces chronic pain in patients, but also has advantage of being undetectable, very addictive and no side effects.This news reaches Tyrant King Pin Drug Lord who is a myth, Legend never seen by anyone. He abducts scientist.

Scientist tries to recover from concussion and finds his hands are zip tied to his back. He can hear harsh voices around him, tries to figures out what is happening from their vague conversations.

Scientist after going through numerous ordeals finds out he is in a Train that keeps on travelling never stops. That’s how Drug Lord is never traced and runs a business throughout country.

Scientist tries to inform railway authorities secretly using High Voltage Signal Communication systems but finds out they are allegedly involved in this crime. They rat scientist out to the Drug Lord.

Drug Lord reveals that whole government is built on his money. Nobody will dare to help him and tortures to reveal the secret formula for illegal drug production.

After some time, scientist realize there is no use of resisting. Instead scientist accepts to mass produce drugs in train. But secretly alters formula of the drug to explosive.

Scientist triggers an explosion and derails the train, bringing down Drug lord’s empire along with train.

Injure scientist wakes up to find himself in bed. Alarm ringing who actually a SW engineer doing 9-9 job.

 

How to make Custom Table Tennis bats from pre-made bats?

Following exercise makes sense only:
If you have a worthy Table Tennis bat with rubber which lost its grip (Wood/Ply blade is good condition) and when rebuild can give excellent performance.
If you are DIY type.
The Finish might not be equivalent to the Factory made bats (But be proud it was/is made by you).

The materials used here are easily available in Hardware Stores.

Materials Required:
1. Pre Made Bat/ Ply Blade.
2. TT Rubber - 2Nos.
3. Silicon Carbide Sheets (Emery Paper) -P220 Grit, 320 Grit, 400 Grit (Increasing Number --> represent fine sanding effect)
4. Sharp knife.
5. Scissors
6. Hair Dryer
7. Water Based Glue

Recommendations:
I have used Fevicol MR (available in India) (I'm Unaware of its ITTF approval)
Suggestions from Internet
1. Tear Mender (Leaves less residue)/ Available in US
2. Fine Zip
3. Yes! Paste
4. Rubber Cement
5. Contact Adhesive

I have used following Rubbers,
Yasaka Mark V Max Table Tennis Rubber (Fore Hand) - Speed +Spin Control
GKI Nano Force Max Table Tennis Rubber (Back Hand) - Slow for Blocking / Minimum Spin.

I strongly suggest carefully choose rubber that matches your style. Because Blade contributes about 20% to the speed or spin. 80% is determined by rubber. (courtesy: www.pingskills.com)

There are Three Sections:
Section I- Removing the Old Rubber+Sponge
Section II- Smoothing the blade surface
Section III- Sticking New Rubber Sheet to Blade

Removing the Old Rubber+Sponge
1. Generally TT Bats made of Blades, Rubber and Sponge. Sponge is stuck on to the surface of the blade. In Pre made bats the Sponge removal can be messy part. It would be extremely difficult to peel it as once piece.
2. Remove the sponge from the blade (Not only Rubber).It might peel off as chunks. Some might stick to the surface of the blade Still. (Don't worry we can remove it)
3. Once we have satisfactorily removed the sponge, we need to smoothen the blade surface to stick new set of rubbers. if the sponge did come off as one piece skip the next section.

Smoothing the blade surface.
1. If we were unlucky, There may be glue and sponge residues sticking on the surface of the blade.
2. Use Silicon Carbide grading sheets, starting with 220 Grit (Coarse Grain) Start Rubbing in outward moving circle movements and apply pressure only when required else the surface of the blade might be scratched.
3. Glue and sponge may be sticking on the edges of the blades more than at the center. So use small 2 inch x 2 inch to rub the edges.
4. Then use the 320 Grit to smoothen the surface and blow the dust way.
5. Wipe away the dust using clean cotton cloth.
6. Use 400 Grit Paper to further smoothen the surface and wipe off.
7. Gently Use Scotch-Brite® Scrub Pad (yes Utensil Cleaner) to rub off residues and dust and wipe with cloth.
8. Inspect the surface of the blade, By Now there should be No Sponge or Glue Residuals if we see any residuals repeat step 4,5,6,7

Sticking New Rubber Sheet to Blade.
1. After the completion of smoothening process, Remove the packing of the rubber and it should be dust free before we apply glue.
2. Take about an thin layer of glue (about 5ml of glue) and Spread evenly (Unidirectional) on the sponge side using foam before it starts drying.
3. Glue should be allowed to air dry to translucent layer from white opaque. Takes about 5 mins.
4. we can speeden the process by using hair dryer. (Ignore if we you dint have the Dryer)
5. Similarly Glue the surface of blade and spread evenly and thinly, Allow it to Air Dry.
6. Stick/Roll the Sponge Side and Blade with ITTF Approved logo near the Handle.
7. See thorough there should be no voids/air pockets.
8. Roll the Top of the rubber using some cylindrical container (like 1 foot PVC Pipe/Any thing in Cylindrical Shape).
9. Cut the extra rubber on the sides to the shape of the blade using a sharp scissor/ Sharp Razor.
10. It might be bit tricky to cut the edges take care that you dont injure yourself.
11. Follow the same process to stick on the other side of the blade too.
12. Apply Pressure (For about 5-7 Hours) by Stocking Pile of books over the bat, to get a firm sticking.
Here is simple video.

Finished Bat

Please Leave your comments if you face any obstacle. I will be glad to help you.

Samsung GT-C5212i E-mail Settings

To set up gmail/ or any email account in any of the samsung entry level models and make use of the inbuilt mail program.
Use the following settings for creating Email Accounts:

• Step 1 : Use the mail setup wizard to set the basic details of your account


• Step 2: Give Name --> What you would like to keep the name of the mailbox. For example keep simply "gmail" or "yahoomail" etc. Hit Next


• Step 3: Then Select POP3 or IMAP4 as per your requirement. but i prefer using POP3 because i don't my mobile full with older emails if you all your old emails and real time interaction with server go for IMAP4. All the steps are same from here. Hit Next


• Step 4: Give you email address example@gmail.com and password example 123


• Step 5: select incoming email server as pop.gmail.com


• Step 6: Select outcoming email server as smtp.gmail.com


• Step 7: You have sucessfully created email account but you need to specify the SSL and the port to connect to the server which is the crucial step of all


• Step 8: After creating the email account go in to the select options -->edit


• Step 9: Select the POP3 Server using the "OK"/ middle button. Put tick mark on the Secure connection and tick mark on the Secur Login (APOP). Typical POP3 port number for gmail is 995


• Step 10: Select SMTP server using the "OK"/ middle button. Put the tick mark on the same userid and password and also go down to tick mark on secure connection. Typical port number for SMTP is 465

All above steps are mandatory to set the email account properly. Email profiles are required for mail to connect to using your GPRS connection I use vodafone sim

• Step 1: Select Profile 1 use the SET NAME --> Vodafone


• Step 2: Access Name set to portalnmms


• Step 3: Set Userid and Password as empty


• Step 4: Set DNS 1: 0.0.0.0


• Step 5: Set DNS2: 0.0.0.0

Setttings for receiving options

• Step 1: Auto Polling --> OFF


• Step 2: Send Read receipt --> ON


• Step 3: Recieving Option --> Header


• Step 4: Download Limit --> Unlimited


• Step 5: Tikc mark in Keep in server

Settings for Sending options

• Step 1: Priority --> Normal


• Step 2: Tick mark on Send me a copy, Request delivery, Request read reciept.

Bingo All set ready to go.

Co-existence of third world !!!

Many times in this world we fail to recognise the existence of the third state and we delibrately ignore them. This is just because we couldn't understand the third state.

For example, Do god exist? There are two answers to this

1). Yes

2). No

But i see three answers, third one is


3). Neither exist nor illusion.


This what is handled by fuzzy logic in electronics. If for some one this sounds weird or if some one thinking have this guy lost nuts.

I would like to cite an example from indian epic, (if people could recollect).

There was a king called thirisanku, who loved his body alot thought when he dies he wish to soul doesn't separate from his body.So with help of vishwamitra (the great sage) he performed yagna and he travelled to heaven. Indira who was jealous of thirisanku. He tried many ways to stop that yagna but with viswamitra on his side Indira's effort went in vain. So tirushanku entered heaven with his body but Indira kicked him off from there.

Enraged vishwamitra created a new heaven called tirushanku sorgam in between heaven and hell.So this an example from epic for the co-existence of the third world.


If we take Gender, Immediately people think of male and female.So my question is what about transgenders. Even they have equal rights to live and flourish. In 16-17th century enunchs were used to bed keepers for king and queens like mules used in army. they are impotent and they have excellent high pitch voice, engaging them in tarbar singers.

Classifying countries, Developed and Under-developed.... what about developing ?????

Colours - Black typical africans, Whites - Europeans..... then what abt Asians (niether black nor white ) ??????

If we could carefully observe then Which way would you classify the BAT - a bird or a mammal?

So What I wish to say is " Don't try to simplify things for your sake, let them be itself and try to understand them on its way. "

Some Useful Sites

Hello friends,

This time I would like to recommend some sites for the welfare of the mankind purely on the basis of the tendency to help. I do not promote or force you to use these sites.

This can be used for self study. I can give you a guideline, its upto you to explore it.

How many times you are frustrated because some useful softwares comes with the trial version, disabled functions that are crucial.It asks us to pay!!!!. I can see so many heads-nodding. Come on in this world there is a price for everything !!!! If you are this kinda of person I advice you to stop here. DONT PROCEED to the next para.

Ok you have decided to proceed to the next para, Welcome to the world of INTERNAUT (Basically people with lost nuts :) LOL ). If you wish to try few helpful softwares that would worth really to got this site, where you can read description about softwares sometimes even reviews and can also download!!!!!!

If you wish to download some movies using torrents you can get almost every movie in this site.
keep an eye for the fake torrents !!!! Dangerous !!!!

If you wish to download e-books you can go to this site

Hope everybody knows how to register in a forum and start viewing & posting.

!!!!WHEREeVER YOU GO WHATEVER YOU DO KEEP AWAY FROM PORN CONTENTS PLS !!!! IT SAVES YOU AS WELL YOUR COMPUTER!!!!!

So If you wish to test and take a risk of looking into these sites I have no concern and I'm not responsible for the outcomes.

To view and explore about softwares :
www.katz.cd
www.soft-best.net
http://www.capslock.ws/

To use torrents to watch movies :
www.mininova.org
www.thepiratebay.org

To watch online movies :
www.megavideos.com

To download e-books :
www.ebookee.com
www.studytemple.com

See U Later ....... In NXT post

Life @ Foreign land !!!!!

Many people would say life is Heaven in XXXX country, You can get this and that, so on. Is it true or Is it the reality.
Many times in life we accept the things that are said to us without even testing the fact. (Ofcourse,There are certain things that we shouldn't test but many people will test it despite warnings and red alerts!!!!!! example: Love)
The same is the first line, Stories are interesting to listen but never try to experience......
After listening to lot of people and endless thoughtful hours I have decided to study automobile engineering from Coventry university, UK. (Well I would rather guide in another blog how to come to UK !!!!!!!????)
Everthing was an adventure and first kinda of feeling butterflies fluttering in stomach (something weird happens only when you fall in love :) ), I was flying in aeroplane for the first time and I stepped in UK, everything was wonderful and so on.
I enrolled in university and attended classes after 4 years break. All Correct (O.K - typical US way of saying) but slowly the lusture and gloss faded away, I felt like I have to go back home. after numerous encounters with native people out here there was one thing very obvious HATRED HATRED HATRED. they just simply hate u !!!! for no reason man.
It was shock, this not what we heard from our forerunners, so where did it go wrong, After careful study I could only imagine two things
1. Either forerunners have lied
2. They have not encountered the situations I have.
No matter what ever might be the reason. The only thing I wish to say is "ALL THAT GLITTERS ARE NOT GOLD " "THERE IS NO COUNTRY BETTER THAN YOUR MOTHER LAND".
So I would rather beg and fall in the feet of those with burning desire to live or become a citizen in other land 'PLEASE STAY WHERE U ARE , ITS THE HEAVEN '.
RESPECT YOUR CULTURE AND SPREAD IT AND FOLLOW IT.